Air compressors are the vital equipment used in the industries and play a very important role in many different ways. Purchasing the best quality air compressor and ensuring its proper maintenance from time to time is the key to extending its life so that it can be used whenever required. Compressor manufacturers in Ahmedabad recommend Preventive maintenance as it is the best way to extend the life of the compressor and minimise downtime as well as repair cost.
There are many different procedures that must be carried out on equipment of various makes and models as part of air compressor maintenance. Preventive air compressor maintenance may save costs and save time. After all, some preventive measures are simple to understand and only need a short amount of time to perform. Leaving such tasks unattended might lead to expensive repair costs in the future. In this article, we will share a few important tips to maintain your compressor so that its life could be extended and it functions up to its full potential.
Tips to maintain air compressor
Below are the important air compressor maintenance tips
1. Check Oil Levels regularly
Although not all air compressors require it, the oil in those that do must be kept fresh to ensure proper operation of the engine’s different sections. Oil can become less viscous under humid working conditions, which eventually prevents it from properly lubricating the parts of an air compressor. If you operate in cooler working settings, you must regularly check the oil and replace it if necessary. This lack of lubrication can cause metal friction and stress along the moving metal parts. For effective circulation, oil must have the right viscosity and be free of contaminants.
2. Replace Filters periodically
Due to exposure in moisture and air, compressors often attract a lot of foreign particles, dust and trash from the environment and are not able to perform as expected. Replacing filters once in a week is recommended as the best way to enhance the compressor’s life and get the desired output
3. Read the user manual
This tip may sound quite simple, yet not everyone follows it. Many air compressor owners completely ignore the manual. However, before attempting to fix anything on your air compressor, you should read the user handbook, which can help you with some of the most typical issues. A user manual is something which is provided by the manufacturer for the people operating the air compressor and must be used properly.
4. Clean the intake valves
By opening and closing the air intake, the air compressor intake valve controls the rotary screw compressor’s capacity. The compressor will enter “unload” mode when the desired pressure is attained, and the unloader valve will nearly fully seal the compressor’s air intake. No more air could be drawn in and compressed in this manner. The intake vents of an air compressor must be clean in order for it to operate at maximum capacity.
5. Tighten all the loose nuts and bolts
Daily use over several months causes nuts and bolts to loosen. The components that make up the machine move when it vibrates. Fasteners and screws that are loose might mean that the machine needs to be adjusted. You can personally test each fastener to check if there is an issue to determine whether loose nuts or bolts are, in fact, loose. Twist the loose fastener until you feel the bolt tighten while maintaining a firm hold on the wrench. The nut should only be turned until it stops moving. If you try to over tighten the bolt, you might strip it.